Kitchen credenzas
Choose a contemporary and elegant kitchen credenza H 800 x W 600 in aluminum coated with a treatment that prevents fingerprints from settling. Its brushed surface offers a perfect aesthetic without the bluish reflections of stainless steel
Product Details
Alu Composite credenza
- Thickness 3 mm
- Rendering : Matte
Aluminum composite is composed of 2 thin aluminum plates surrounding a high density polyethylene core
It is rot-proof, stainless and non-deformable. It resists to temperature variations up to 180°C.
CompatibilityCeramic, electric and induction hob
Easy to installEasy to install and delivered with instructions for use, our credenzas are easily installed on any type of support (old tiles, brick, plaster...)
Two types of installation are possible: Gluing with transparent silicone glue (used in the building industry and available in DIY stores): simple and fast. Screwing : adapted to non flat surfaces.
Cutting our credenzasCut and drill your panel as easily as wood. It is possible to cut our credenzas with a jigsaw or a circular saw
Use a hole saw for the electrical outlets notches.
MaintenanceOur materials can be cleaned with traditional household products (glass cleaner, dishwashing liquid, cleaning cream, etc.). A simple sponge wipe and your credenza is clean and shiny like the first day.
Avoid using abrasive products such as steel wool or other products that could cause scratches
DelaysOur delivery time is 20-25 days after validation of your order.
Alu Composite
Composed of 2 thin aluminum plates surrounding a high density polyethylene core. It is rot-proof, stainless and non-deformable. It resists temperature variations up to 180°C. Its matte finish and no reflection offers a modern and refined finish.
Tempered glass
Mineral glass that is 5 times more resistant to shocks than traditional glass. It cannot shatter and resists high temperatures up to 500°C. The glass reflects sunlight and gives an extra aesthetic dimension to the image.
Thickness Rendering
3 mm Matt
Compatibility
Thickness Rendering
3 mm Matt
Compatibility
Synthetic glass (polycarbonate)
Transparent, high-end material with the same appearance as glass. 250 times more resistant than mineral glass, perfectly waterproof and resistant to temperature variations up to 180°C. Its shiny finish reflects the sunlight and brings depth and brightness
Brushed aluminum
It is composed of 2 thin aluminum plates surrounding a high density polyethylene core. It is rot-proof, stainless and non-deformable. It resists temperature variations up to 180°C. It is coated with a treatment that prevents fingerprints from settling. Its brushed surface is identical to that of stainless steel and offers a perfect aesthetic without the bluish reflections of stainless steel.
Thickness Render
3 mm Glossy
Compatibility
Thickness Rendering
3 mm Glossy
Compatibility
Cutting materials
Aludibond, Brushed aluminum and Acrylic glass:
These 3 materials are easily cut with a jigsaw or circular saw.
Use a hole saw for electrical outlet notches. We can cut out socket notches on request.
Tempered glass: You cannot cut this material. It is cut by us before the glass is tempered.
Circular saw
Wooden blade
Hole saw
Simple credenzaFor the width, measure your wall from edge to edge. For the height, go up to the hood if possible, otherwise we recommend a minimum of 45 cm high to protect your walls from splashes.
L-shaped credenzaFor the width, measure your wall from edge to edge / For the height, go up to the hood if possible, otherwise we recommend a minimum height of 45 cm to protect your walls from splashes.
U-shaped credenzaFor the width, take the measurements of wall 2 from edge to edge. Then take the measurements of wall 1 and wall 3 from edge to edge, and remove 4 mm (7 mm for tempered glass) on each return to compensate for the overlap of the panels.
Variable credenzaMeasure each panel edge to edge. For a hood back, order the width of your cooktop or hood. Feel free to add in the comment of your order, your preferences for the framing.
Window credenzaCut each part of your credenza into a rectangle. Take the measurements of each of these rectangles edge to edge, and remove 4 mm (7 mm for tempered glass) on each return to compensate for the overlap of the panels.
IN THE SAME RANGE
WE ALSO RECOMMEND :