copy of Kitchen credenzas

Alu Composite credenza

- Thickness 3 mm

- Result : Matte

Aluminium composite is composed of 2 thin aluminium plates surrounding a high density polyethylene core.

It is rot-proof, stainless and non-deformable. It is resistant to temperature variations up to 180°C.

Compatibility

Ceramic, electric and induction hobs

Easy to install

Easy to install and delivered with instructions for use, our credenzas can be easily installed on any type of surface (old tiles, brick, plaster...).

Two types of installation are possible: Gluing with transparent silicone glue (used in the building industry and available in DIY stores): simple and fast. Screwing: suitable for non-flat surfaces.

Cutting out our credenzas

Cut and drill your panel as easily as wood. It is possible to cut our credenzas with a jigsaw or a circular saw.

Use a hole saw for the electrical socket notches.

Maintenance

Our materials can be cleaned with traditional household products (window cleaner, dishwashing liquid, cleaning cream, etc.). A simple sponge stroke and your credenza is clean and shiny as on the first day.

Avoid using abrasive products such as steel wool or other products that could cause scratches

Delays

Our delivery time is 20-25 days after validation of your order.

Alu Composite

Composed of 2 thin aluminium plates surrounding a high density polyethylene core. It is rot-proof, stainless and non-deformable. It is resistant to temperature variations up to 180°C. Its matte and reflection-free finish offers a modern and refined look.

Tempered glass

Mineral glass that is 5 times more resistant to shocks than traditional glass. It cannot shatter and resists high temperatures up to 500°C. The glass reflects sunlight and gives an extra aesthetic dimension to the image.

Thickness Rendering

3 mm Matt

Compatibility

Thickness Rendering

3 mm Matt

Compatibility

Synthetic glass (polycarbonate)

Transparent, high-end material with the same appearance as glass. 250 times more resistant than mineral glass, perfectly waterproof and resistant to temperature variations up to 180°C. Its shiny finish reflects the sunlight and brings depth and brightness

Brushed aluminium

It is composed of 2 thin aluminium plates surrounding a high density polyethylene core. It is rot-proof, stainless and non-deformable. It is resistant to temperature variations up to 180°C. It is coated with a treatment that prevents fingerprints from settling. The brushed surface is identical to stainless steel and offers a perfect appearance without the bluish reflections of stainless steel.

Thickness Finish

3 mm Glossy

Compatibility

Thickness Rendering

3 mm Gloss

Compatibility

Cutting materials

Aludibond, Brushed Aluminium and Acrylic Glass:

These 3 materials are easily cut with a jigsaw or circular saw.

Use a hole saw for the socket notches. We cut out socket notches on request.

Tempered glass: You cannot cut this material. It is cut by us before the glass is tempered.

Circular saw

Wooden blade

Hole saw

Simple credenza

For the width, measure your wall from edge to edge. For the height, go up to the hood if possible, otherwise we recommend a minimum height of 45 cm to protect your walls from splashes.

L-shaped credenza

For the width, measure your wall from edge to edge / For the height, go up to the hood if possible, otherwise we recommend a minimum height of 45 cm to protect your walls from splashes.

U-shaped credenza

For the width, take the measurements of wall 2 from edge to edge. Then take the measurements of wall 1 and wall 3 from edge to edge, and remove 4 mm (7 mm for tempered glass) on each return to compensate for the overlap of the panels.

Variable credenza

Measure each panel edge to edge, and for a hood back, order the width of your cooktop or hood. Do not hesitate to add in the comment of your order, your preferences for the framing.

Window credenza

Cut each part of your credenza into a rectangle. Then take the measurements of each of these rectangles edge to edge, and remove 4 mm (7 mm for tempered glass) on each return to compensate for the overlap of the panels.